HAIX CLIMBER

This extra-torsion-resistant safety shoe has been developed together with mast climbers for power and energy supply from HAIX. This boot is also popular in landscaping and horticulture. The Climber is part of the workwear collection from HAIX and keeps your feet dry both summer and winter. The four-layer GORE-TEX ®membrane ensures that no rain drops penetrate your safety shoes. Sweat evaporates to the outside, so your feet do not sweat even on hot days.

In addition, the plastic / non-woven bristle sole and the anatomically shaped insole absorb moisture in the boot. Pigments in the leather reflect the sunlight, so that the black work shoes do not need to heat up unnecessarily. This way, your feet feel good even after many hours in the safety boots.

Thanks to the robust profile, you have firm support on every surface - even on wet ladder rungs or bridges. A wide rubber band over the sole supports the side stability of the safety shoes. The wide toe cap prevents injury from falling objects or impacts.

Workwear with high wearing comfort

The work boots from HAIX are not only safe, but also comfortable: over the heel flex, a leather reinforcement is incorporated so that you do not rub the sensitive area. At the same time, you have a lot of freedom of movement, for example when you have to kneel at work.

A PU dampening wedge in the heel cushions your steps when walking. As a result, the safety shoe saves back and joints. Even after long stretches your feet are fit and do not hurt.

uppers

• The HAIX boots consist of genuine bull leather. This is especially robust and durable.
• The leather is hydrophobic. This means: It is water repellent.
• Pigments in the leather reflect the sunlight so that less heat reaches your feet.
• The safety shoe is covered with rubber at the tip. So the leather does not take off so quickly at this point.

Inner lining, footbed and inserts

• The four-layer GORE-TEX ® membrane in the inner lining makes your shoe waterproof. Rain or other liquids do not penetrate your safety shoes. At the same time, the material allows your feet to "breathe".
• The work shoes are lined with abrasion-resistant lining and are therefore comfortable to wear in any weather.
• The padded and extra wide toe cap prevents injuries due to falling objects such as branches or tools.
• The plastic / fleece bristle absorbs moisture in the safety shoe immediately.
• It is rigid. That is, it is particularly stable and does not twist. This keeps your feet firmly in the shoe.
• In addition, an anatomically shaped insole absorbs sweat and immediately dries again. It can be replaced and washed if necessary.
• A PU wedge is used in the heel of the safety shoes. It soothes your footsteps and spares joints and intervertebral discs.

sole

• The rubber compound is abrasion-resistant and non-slip.
• The deep terrain profile of the safety shoes gives you a firm grip on any surface, whether on smooth roads or wet bridges.
• Rubber strips on the side stabilize your foot additionally.
• The sole does not stain. Even on light floors, your safety shoe does not leave any dark traces.